Sennheiser Ambeo VR

The elegantly designed AMBEO® VR Mic has been developed in cooperation with VR content producers and fine-tuned through an extensive creators’ program with participants from across the audio and VR communities. The mic caters exactly to the needs of VR content creators, letting you capture the experience and spirit of any location enabling the listener to be immersed as if they were there.
The AMBEO VR outputs with a female 12 Pin DIN12M to 4 x 3Pin Male XLR's cable. (included).

Specs:
  • Dimensions - 215 x 49/25 mm (L x D)
  • Frequency response - 20 Hz to 20 kHz
  • Max. sound pressure level - 130 dB(A) for 1 kHz
  • Transducer principle - Pre-polarized condenser microphone
  • Weight - 400 g
  • Microphone connector DIN12M - use enclosed adapter cable to convert to 4x XLR3M Polarity: Pin1 (GND), Pin2 (+), Pin3 (-)
  • Pick-up pattern - 4x cardioid, in A-format arrangement (1: front-left-up [FLU], 2: front-right-down [FRD], 3: back-left-down [BLD], 4: back-right-up [BRU])
  • Nominal impedance - Approx. 200 Ω
  • Min. terminating impedance -1000 Ω
  • Storage temperature -20 °C to 70 °C (-4 °F to 158 °F)
  • Operating temperature -10 °C to 55 °C (14 °F to 131 °F)
  • Equivalent noise level - 18 dB-A as per IEC 61672-1 / 27 dB CCIR as per CCIR 468-3
  • Power supply - 4x phantom powering (P48) as per IEC 61938 (48 ± 4 V), 7 mA each
  • Sensitivity - 31 mV/Pa (-30 dBV)
  • Operating relative humidity - Max 90% at 40 °C
  • Matrix reference Center of the capsule holder
  • Mixing to B-format W = FLU + FRD + BLD + BRU / X = FLU + FRD – BLD – BRU / Y = FLU – FRD + BLD – BRU / Z = FLU – FRD – BLD + BRU

Sennheiser Ambeo VR
 
Art.nr: K028233
Adviesprijs:
€1.500,00
Prijs Ex. BTW:
€1.345,00
Aantal

    Wenslijst
Sennheiser Ambeo VR Virtual Reality Microphone 
The elegantly designed AMBEO® VR Mic has been developed in cooperation with VR content producers and fine-tuned through an extensive creators’ program with participants from across the audio and VR communities. The mic caters exactly to the needs of VR content creators, letting you capture the experience and spirit of any location enabling the listener to be immersed as if they were there.
The AMBEO VR outputs with a female 12 Pin DIN12M to 4 x 3Pin Male XLR's cable. (included).

Specs:
  • Dimensions - 215 x 49/25 mm (L x D)
  • Frequency response - 20 Hz to 20 kHz
  • Max. sound pressure level - 130 dB(A) for 1 kHz
  • Transducer principle - Pre-polarized condenser microphone
  • Weight - 400 g
  • Microphone connector DIN12M - use enclosed adapter cable to convert to 4x XLR3M Polarity: Pin1 (GND), Pin2 (+), Pin3 (-)
  • Pick-up pattern - 4x cardioid, in A-format arrangement (1: front-left-up [FLU], 2: front-right-down [FRD], 3: back-left-down [BLD], 4: back-right-up [BRU])
  • Nominal impedance - Approx. 200 Ω
  • Min. terminating impedance -1000 Ω
  • Storage temperature -20 °C to 70 °C (-4 °F to 158 °F)
  • Operating temperature -10 °C to 55 °C (14 °F to 131 °F)
  • Equivalent noise level - 18 dB-A as per IEC 61672-1 / 27 dB CCIR as per CCIR 468-3
  • Power supply - 4x phantom powering (P48) as per IEC 61938 (48 ± 4 V), 7 mA each
  • Sensitivity - 31 mV/Pa (-30 dBV)
  • Operating relative humidity - Max 90% at 40 °C
  • Matrix reference Center of the capsule holder
  • Mixing to B-format W = FLU + FRD + BLD + BRU / X = FLU + FRD – BLD – BRU / Y = FLU – FRD + BLD – BRU / Z = FLU – FRD – BLD + BRU